Showing posts with label for sale. Show all posts
Showing posts with label for sale. Show all posts

Monday, November 17, 2014

New 335/30ZR18 Hoosier A7s for Sale + Used Hoosier A6s for Sale + Goodyear Eagle RS race tires



Two New 335/30ZR18 Hoosier A7 tires for sale
 - $325 per tire plus shipping ($413 new on TireRack plus shipping)
UPDATE 1-4-2015: SALE PENDING

Used Hoosier A6 Tires for Sale (UPDATE 1-4-2015: Prices Reduced)


Two 335/35ZR17 A6s - only used for 12 runs at 2014 Solo Nationals (flipped after 6 runs). Purchased in Aug. 2014 (2314 Date Code) (stored inside w/ AC)
     - $180 per tire plus shipping ($369 new on TireRack plus shipping)


Two 315/35ZR17 A6s - only used for 12 runs at 2014 Solo Nationals (flipped after 6 runs). Purchased in Aug. 2014 (1414 Date Code) (stored inside w/ AC)
     - $160 per tire plus shipping ($348 new on TireRack plus shipping)


Two 335/35ZR17 A6s - 20 runs at Pro Finale plus Nats TNT (Flipped after 12 runs). Contingency tires from April 2014 (4713 Date Code) (stored inside w/ AC)
     - $140 per tire plus shipping


Two 315/35ZR17 A6s - 20 runs at Pro Finale plus Nats TNT (Flipped after 12 runs). Purchased in Aug. 2014 (1314 Date Code) (stored inside w/ AC)
     - $120 per tire plus shipping

Two 335/35ZR17 A6s - 32 runs. Flipped around 16 runs. Purchased in March 2014 (4713 Date Code)  $80 per tire plus shipping
UPDATE 1-4-2015: SOLD

Two 315/35ZR17 A6s - 32 runs. Flipped around 16 runs. Purchased in March 2014 (2413 Date Code)  $80 per tire plus shipping
UPDATE 1-4-2015: SOLD



Two New 315/35ZR17 Goodyear Eagle RS (Autocross Compound) Tires for Sale
     - $100 per tire plus shipping OBO (Date Codes: one is 4811, the other is 4911)

I also have plenty of used 315/35ZR17 Goodyear Eagle RS tires. Price will  be cheap and flexible. Contact me if interested.

I run a split 335/315 setup on the Camaro so all of these were run as a set but I will sell in pairs. I am willing to ship tires and willing to deal if you want the whole lot.  Please email me at if interested and we can work out the details.

Saturday, October 25, 2014

The ESP Camaro is for Sale!


I'm selling my 2001 Camaro Z28 E Street Prepared as a race ready package with extra wheels, tires, and spares. This is one of the best prepared and fastest ESP cars in the country - ask anyone who has driven it recently (Strano, Brian Burdette, Lane Borg). I am making plans for wheel-to-wheel racing so the Camaro will need to go. 

I have owned the car since Sept. 2011 when I bought it from Sam Strano. Sammy owned the car from new (Sept. 2000) and won numerous F-Stock and ESP ProSolo and Solo National Championships with it. I have finished 3rd, 4th, and 6th at the last 3 Solo Nationals. This year, my pace was hampered by too much inside wheel spin due the diff wearing out so the car is faster than the results show this year. I will purchase a new Auburn Gear Racer's Diff and include it with the car. Other than this, the car is in top shape and ready to race. I recently had it re-tuned by LG Motorsports on their dyno, changed all fluids and had the transmission fully rebuilt by Texas Drivetrain Performance (it had never been rebuilt and too many years of Sammy and I speed shifting had worn out 2nd gear....) so it shifts perfectly now. I can provide dyno sheets if interested. I have won several National Tour and ProSolo events in the car including setting Top Pax at the 2014 College Station Tour. I have setup sheets and notes for the testing I have done in the past three years. Sam has been a great resource in the development of this car too. 

The Camaro is white with a 6-speed transmission. It has 49,500 miles on the odometer. The roof was originally black but I had it vinyl wrapped in white and then applied the blue and orange vinyl stripes to the car in 2012. It is currently not registered or inspected. It is always kept inside my shop and has basically only been used for autocross since I've owned it. In the interest of full disclosure, this is not a show car. It's got some dings and dents, and it was in one accident in 2006 but Sam also won Nationals in it 8 weeks later by a big margin.

$14,250 takes the full package or make me an offer! Car is located in San Angelo, TX. Come buy a fast and fun racecar for one of the most popular autocross classes out there.....one small bonus - no index racing for ProSolo! Please email me if you are interested - DOgburn at gmail dot com. Thanks for the interest!


Here is the parts list (I'm sure I am forgetting something, but this is all of the big stuff):
On the car:
StainlessWorks long-tube headers w/cats
SLP exhaust (will meet sound reqs, sounds good but not overly loud)
Koni shocks, fronts shocks have coil-over sleeves installed
Fays2 Watts linkage
Auburn Racer's differential
Adjustable torque arm
Strano Performance Parts tubular 35mm and 22mm sway bar set
Custom-modified Global West front upper control arms (for increased camber)
1LE lower control arm bushings (front and rear)
Redline fluids in diff, tranny, and engine
Motul fluids in clutch and brake system
Aluminum flywheel and upgraded clutch
Stainless steel brake lines
Lightweight Braille battery to the right rear
12lb Kirkey aluminum seats for driver and passenger (I have the stock seat too) 
Grant F1 steering wheel (not the cheap ones, the nice Momo style 3 spoke type)
Upgraded front sway bar mounts
Complete set of factory service manuals
HAWK DTC-30 pads in front, Hawk HPS in rear
UMI 2-point sub-frame connectors
Upgraded engine mounts
800lb HyperCoil front springs, 400lb HyperCoil springs
TA Performance Diff Cover (more support for carrier bearings)


Spares/Extra Parts:
Stock front upper control arms with StranoParts offset bushings
Brand new Auburn Gear Racer's diff
600 & 700 lb front springs
Lots of rear springs (StranoParts, HyperCoil, Landrum) - basically everything from 150 to 450lbs. Most lightly use (just testing).
Stock parts for basically every aftermarket part that was installed including seats
Assorted used brake pads
Diff rebuild parts
Extra fluids/fuel
Stock rear ARB
22mm hollow Strano ARB (non-adjustable)
Koni Single Adjustable Rear Dampers (on-car adjustable)

Wheels:
Four 17x11 Forgeline RS-Competition race wheels
Four 17x9 Camaro SS wheels (used for rain tires)
Four 17x9 WS6 Stock wheels - I have an old set of rains on these for street/"roll around" tires

Tires:
Three sets of used 315/35ZR17 Hoosier A6 tires (good enough for locals/practice). 
One set of 275/40R17 Hoosier Radial Wet H2O -  Rain tires purchased in March 2011 and only used once (I won with them at 2013 Spring Nats)
Also see here for more tires for sale (they can be worked into the deal if interested) - http://www.roadraceautox.com/showthread.php?50650-Hoosier-A6-Tire-Sale-New-and-Used

More Photos Here: https://www.flickr.com/photos/yaw_moment_racing/sets/72157649698100478/



ESP Camaro from 2014 Solo Nationals
ESP Camaro from 2014 Solo Nationals
ESP Camaro from 2014 Solo Nationals
ESP Camaro from 2014 Solo Nationals
17x11 Forgeline Wheels, Used Hoosier A6s
Bolt-on Camaro Hitch
Koni Single Adjustable Rear Dampers
Hoosier Rain Tires, 17x9 Wheels
Tuning Parts and Factory Service Manuals
Chrome 17x9 WS6 Wheels w/ old Hoosier Rain Tires

Tuesday, November 12, 2013

For Sale: 2010 Spirit (Birel) SP32 Stock Moto Package w/ spares and trailer


I am selling my stock moto shifter kart package. This is is a ready to race complete package. The chassis is a 2010 Spirit SP32 32mm shifter chassis. The chassis was designed by multi-time karting World Champion Gianluca Beggio and made by Birel. It is very similar in construction to the Birel 32mm chassis, likes to be tuned the same way, and uses the same Freeline components (therefore all parts can be purchased from a Birel dealer). I purchased the kart from 3G Kart Racing in Katy, TX (a Birel dealer and race team) after it was raced only once in the WSK series. I raced it for one full regional season in 2011 and a few local races in 2012. It was has never been crashed. The kart is currently fitted with a Birel pedal extender for taller drivers. It has a plastic full length rear bumper. 


The engine is a Honda CR125 built to SKUSA legal stock moto specs by SRS Engines. It uses SRS' Hybrid Float twin pump fuel system with a PMW carb so it is a potent package. For exhaust, the kart has a RLV R4 pipe with a adjustable M4 Silencer. It is cooled by a large radiator that was custom sourced by 3G Kart Racing (cost ~425 new). I used honeycomb to cover it so it is in good condition.

The kart comes with a Mychron 4 w/ GPS and data key. The kart is wired to log EGT, RPM, and water temp. 

Kart stand included with kart. 

Trailer
My trailer is a 2008 Haulmark 6x12 Box trailer. The tires have low mileage and it has bolted in mounting points to tie down my kart on it's kart stand. 


Spares & Tools

Chassis: Extra set of Douglas Mag wheels, 5 total axles (Freeline B, D2.0, D2.5 (on kart), F, and P), Z-Racing kart cover, 4 spare tierods (from other chassis, used for hardware spares), spare shifter linkage, two spare throttle cables, 2 spare clutch cables, extra radiator mounts, box of assorted seat struts and chassis brackets, 1998-1999 Honda CR125R Service Manual, 1992-1997 Honda CR125R Service Manual, 2 spare pedals (from a different chassis), many extra front and rear brake pad shims, many new and used brake rebuilt kit parts (caliper and MC), different length brake rod, extra fuel cap, extra hardware for wheel bead stops, two 5lb lead weights

Engine: PWK carb, Jet set for PWM or PWK carb (lots of different jets, ask for details), adjustable shims for M4 silencer, two bottles of Motul 2T pre-mix, Bottle of 10W30 Motul gearbox fluid, new CR125 piston ring, used CR125 piston w/ ring (good condition), spare RLV R4 pipe, spare M4 Silencer, Spare AMC Aluminum engine mount, many feet of extra fuel hose of various colors, many extra radiator hose and reduction fittings, spare fuel filter, New SRS reeds, new water pump gasket, new Honda ECU cover, New NGK spark plug wire, four new NGK BR9EG spark plugs, Six used NGK iridium BPR9EIX spark plugs, many new and used fuel pump rebuilt parts, spare exhaust gasket and seals, four used CZ/DID chains, spare engine sprockets (14T new, 15T new, 15T used, 16T used, 17T used), spare aluminum axle sprockets (22T, 24T, 25T, 26T, 27T)

Mychron Parts: Two AIM beacon pickups (kart side), 3 total transponder mounts (1 on kart), extra EGT lead, wheel speed sensor w/ extra axle pickups

Tools: Birel front spindle wrench, tire bead breaker, chain breaker, piston stop, fuel jug

Spares & Tools Package

I am asking $7,500 for the full package. I would prefer to sell it as a full package with the trailer. I will consider selling the kart and/or trailer separately. I will not sell individual parts until the kart is sold. Please email at < dogburn at gmail dot com> with questions. Thanks for the interest. 



Extras
I have several extra items that can be added to the package if you want:
- 38gal of VP MS89L race fuel (34gal in a 54gal drum, 4gal in a 5gal can)
- 360 Device Neck Brace
- Alpinestars Tech 1-KR Karting Gloves (Size L)


 

Here are some more current detail shots of the kart:








Monday, May 21, 2012

For Sale: Low Mileage 2004 Mazdaspeed MX-5 (Factory Turbocharged Miata)


credit: Vu Banh 

I am selling my 2004 Mazdaspeed MX-5. It currently has 46,575 miles. This is a low-mileage, very clean car that I have only used as a daily driver. This car is a blast to drive and I have enjoyed it, but it is time to get a more practical hatchback. I usually get about 26mpg combined and between 28 and 30mpg with all highway driving. This MX-5 features a 1.8L turbocharged engine that it is estimated to produce 200 wheel horsepower with the modifications listed below. It has a 6-speed manual transmission. I recently put Kumho All-Season tires on it which have less than 1,000 miles.

I am the 2nd owner and have owned this car since it had 22,000 miles. The first owner modified the car with the following bolt-on parts:

Modifications:
Boss Frog Double Max Miata Roll Bar
Flyin' Miata Mazdaspeed MX-5 Intake Upgrade Kit
GFB Blow-Off Valve
Flyin' Miata Mazdaspeed MX-5 Midpipe and Exhaust Upgrade
Flyin' Miata Mazdaspeed MX-5 Intercooler Upgrade Kit
A-Pillar Mounted Boost Guage

Price: $11,900 ($1,800 under KBB so priced to sell!)

This car would make a great daily driver, autocrosser, or track day toy...or all three. Please contact Dave Ogburn at (DOgburn at gmail dot com) for questions. I can provide more information, a VIN number, and more photos upon request. These are photos taken of my car in November 2011 (still this clean).  Thanks.

 credit: Vu Banh 


credit: Vu Banh


Wednesday, November 16, 2011

Photoshoot for my Mazdaspeed Miata Tonight

I got my car detailed today (thanks Ali!) by Longhorn Motors and wanted to take some photos while the car still looks immaculate.

There is an abandoned K-Mart near my house which I thought would make a cool spot to take photos and provide a consistent background. I started out with some basic shots like this:

After about twenty minutes of me taking so-so photos, my buddy Vu (his blog here) showed up and turned my photoshoot into a magazine cover quality shoot.

Here is Vu in action:

And the result:


Thanks for the great photos Vu! My Mazdaspeed Miata is for sale so comment or email me if you are interested.

Monday, May 2, 2011

For Sale: Freeline DF130 / DF210 Magnesium Wheels

Set of 4 good condition Freeline Mag wheels with bead locks included. I've only raced on these wheels once. Off of a Spirit SP32 shifter kart. $300 shipped. Contact me at dogburn at gmail.com if interested.

Monday, February 28, 2011

2008 Birel M31 Rolling Chassis for Sale + Other parts

For Sale: 2008 Birel M31 Rolling Chassis (update: SOLD)

I have 2008 Birel M31 rolling chassis for sale. I am the second owner. The previous owner was a kart shop owner in Dallas so the kart has been well taken care of. Low usage - only 9 races on the chassis. Chassis has front brakes and was used for 125cc Stock Moto shifter class, but could also be used for TAG/Rotax racing. Comes with radiator, full bodywork kit, and 1 set of wheels. Just add seat and motor and go racing.

Price: $1700 OBO. Located in San Angelo, TX. Willing to ship at buyer's expense.

Mychron 4 Gold Expansion Box - SOLD

Mychron Wheel Speed Sensor & axle collar - $30

-Outside surface of metal connector is damaged, but wire/sensor are in good condition and function properly

Coleman Self-Contained Gear Reduction Starter - SOLD

Good condition. Functions well.

Flex Holder Tool for 50mm Flex (TaG) - $35

Allows you to clamp down the flex to cut it properly

2001-2005 Mazda Miata Cobalt XR3 Front Brake Pads - $100 (

Cobalt Friction CRB.XR3.D890 brake pads for sale. These are XR3 compound front brake pads for a 2001-2005 Mazda Miata. Brand new, never opened.

New Price is $180. I will sell for $100.


Feel free to contact me (dogburn at gmail dot com) with questions. Thanks.